Owalo 7000 pendant color birch
Owalo 7000 pendant color white
Owalo 7000 pendant color black
Owalo 7000 pendant color walnut

Owalo 7000: Tranquil balance

A horizontal pendant that lights up both meeting rooms and dining areas. Comes with the latest in LED technology. 


Colour:

Get it here!

Owalo 7000. Design Dock, Helsinki Design Week. Photo by Uzi Varon

Owalo 7000. Locker & Légere Hotelbetriebs, St. Ruprecht / Raab, Austria. Photo by Markus Kaiser

Owalo 7000. Actavis Baltics Office, Vilnius, Lithuania. Design by Arch. Ruta Bagdzeviciute. Photo by Dualhead

Owalo 7000 pendant

Handmade of PEFC-certified formpressed birch in Finland by highly skilled craftsmen. The wood provides a soft luminosity for atmosphere and appeal. Uses the latest LED-technology.

Finishing options

Natural birch White textile cable + ceiling cup
White laminated White textile cable + ceiling cup
Black laminated Black textile cable + ceiling cup
Walnut veneer White textile cable + ceiling cup

Product details

Material Formpressed birch
Sizes Height 5.1 in
Length 39.4 in
Width 3.5 in
Weight 7.1 lb
Package 46.9 × 8.7 × 7.1 in, 11.0 lb
Light source A built-in LED, 22 W, 2850 K, 2500 lm, CRI 85, dimmable (built-in step dimming + trailing edge compatibility)
Cable 15 ft, textile cable, connector, ceiling cup, 2 steel wires
Classification Ingress Protection IP20, IEC Protection Class II, ETL/CETL listed
Installation Please refer to the separate instructions on the website.
Maintenance Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth.

Assembly instructions

  1. Assembly cable holder
  2. Connect
  3. Adjust the balance and hight
  4. Cable straightener: Adjust position and tighten the screw.

Note: Built-in step dimming + trailing edge compatibility.

Warning: The cable or light source can only be replaced bythe manufacturer or an authorized service agent

Be sure to insert the cable into the holder at least far enough to be able to clearly see it protrude from the other end of the holder. When attaching the holder into concrete or stone, use a screw anchor.

Dezall lamptops

This Secto Design pendant uses the patented ceiling suspension by Dezall. Easy and quick to install, enables the ceiling cup to sit perfectly tight against the ceiling.

Step 1 Lock the cord in the upper part of the screw, start in the middle. Then insert it into the opening along the thread. Push it down into the bottom of the channel.
Step 2 Insert the screw, plug and remaining cord through the cover from below. Also insert it through the ring if this is to be used.
Step 3 Put the two matching bottom parts together, facing each other, around the cord between the cover and the lamp. Insert the assembled bottom part into the cover by fitting the “wings” into the slots inside the cover. Push it into the cover until fully seated.
Step 4 Hang the screw on the ceiling hook and connect the plug.
Step 5 Move the lamptop upwards towards the screw hanging on the hook. When the screw and the bottom parts’ “nut” have come in contact inside the cover, start screwing the cover clockwise until it reaches the ceiling.
Step 6 The lamptop is now sitting straight to the ceiling.

Round ceiling cup 

Height3.2 in / 3.5 in (with ring)
Outer upperØ 4.4 in / 4.6 in (with ring) 
Inner upperØ 4.6 in / 4.7 in (with ring)
Weight0.13 lb / 0.16 lb (with ring)
ColorWhite or black matt soft lacquer depending on the colour of the pendant.
InformationThe round ceiling cup includes an additional ring, which enables leading the cable along the ceiling into the ceiling cup. The additional ring can also be used to cover a larger ceiling socket.

Any extra length of the cable can be swirled into the ceiling cup when altering the hanging height of the pendant.