Magnum 4202 pendant color birch
Magnum 4202 pendant color white
Magnum 4202 pendant color black
Magnum 4202 pendant color walnut

Magnum 4202:
Monumental yet cosy

Magnum 4202 was originally designed for public spaces. Also great in homes with high ceilings.

Colour:

Get it here!

Magnum 4202. Livraria Cultura, São Paulo, Brazil. Project by studiomk27. Photo by Fernando Guerra

Magnum 4202. VPK Packaging, New headquarters, Aalst, Belgium. Architecture and interior design by De Cort & Dervichian. Photo by De Cort & Dervichian

Magnum 4202. Cafe & Restaurant De Plantage, Amsterdam, The Netherlands. Architecture by Studio Linse. Photo by Ellen Swaan

Magnum 4202 pendant

Handmade of PEFC-certified formpressed birch in Finland by highly skilled craftsmen. The wood provides a soft luminosity for atmosphere and appeal.

Finishing options

Natural birch White textile cable + ceiling cup
White laminated White textile cable + ceiling cup
Black laminated Black textile cable + ceiling cup
Walnut veneer White textile cable + ceiling cup

Product details (ETL/CETL)

Material  Formpressed birch
Sizes Height 34.3 in
Diameter Ø 22.0 in
Weight 9.0 lb
Package 22.8 × 22.8 × 36.6 in, 19.8 lb
Light source E26 (LED max. 22 W) or GU24 (LED max. 17 W). Bulbs are not included. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating
Cable 8 ft, textile cable, ceiling plug/connector, ceiling cup, 3 steel wires
Classification Ingress Protection IP20
IEC Protection Class II
ETL/CETL listed
Installation Please refer to the separate instructions on the website.
Maintenance Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth.

Installation instructions

Step 1 Install the power cord and support wires as illustrated. NB. The power connector may vary according to the local standard or regulations. Consult an authorized electrician if necessary.
Step 2 Insert the wires into the cord slot. Tighten the cup to the screw according to the separate manual.
Step 3 Loosen all three steel wires and let the whole weight of the lampshade rest on the power cord only. Leave for 24 hours to stabilize the height.
Step 4 Tighten the support wires by pulling them. You may cut the extra length.

Steel wire details

The Magnum pendant includes three steel wires for balancing the shade.

The wires are attached from the end loops (pic. 1) to the ceiling hook (not incl.) inside the ceiling cup. The other end of the wires are attached to the shade. If the hanging height of the Magnum is altered, the length of the steel wires can be changed with the adjustable screws (pic. 2) by pushing the tip at the top of the screws down and then sliding the wire into the hole.

Please find enclosed detailed images of the loops and the adjustable screws.

The end loops of the Magnum steel wires (above). The adjustable screws of the Magnum steel wires (below)

Standard ceiling cup

Height4.4 in / 4.7 in (with ring)
Outer upperØ 4.8 in / 5.2 in (with ring) 
Inner upperØ 4.6 in / 4.8 in (with ring)
Weight0.13 lb / 0.16 lb (with ring)
ColorWhite or black matt soft lacquer depending on the colour of the pendant
InformationThe standard ceiling cup includes an additional ring, which enables leading the cable along the ceiling into the ceiling cup. The additional ring can also be used to cover a larger ceiling socket.

Any extra length of the cable can be swirled into the ceiling cup when altering the hanging height of the pendant.
Choose your region