Site: North America
Secto 4210 floor lamp is available in natural birch
Secto 4210 floor lamp is available in white laminated
Secto 4210 floor lamp is available in black laminated
Secto 4210 floor lamp is available in walnut veneer

Secto 4210 floor lamp:
Timeless companion

The floor lamp Secto 4210 is a member of the original Secto family. A timeless living room and lobby companion when you are after a cosy light.

Colour:

Get it here!

Secto 4210 floor lamp

Secto 4210. Holiday Apartment Villa Tykkyrinne. Iso-Syöte, Pudasjärvi, Finland. Photo by Petri Teppo / Studio Arctica.

Secto 4210. Sky Room, Clarion Hotel Helsinki. Helsinki, Finland. Photo by Uzi Varon.

Secto 4210. V4 House, São Paulo, Brazil. Project by studiomk27. Photo by Nelson Kon

Secto 4210. Open Innovation House – OIH, cafe, Aalto University, Otaniemi campus, Espoo, Finland. Interior design by Tuula Lindström. Photo by Uzi Varon

Secto 4210 floor lamp is available in four colours: birch, walnut, black and white.
Secto 4210 floor lamp is 175-185 cm high and its base is 34 cm.

Secto 4210 floor lamp

Handmade of PEFC-certified form pressed birch in Finland by highly skilled craftsmen.

Finishing options

Natural birch
Black cable + structure painted grey frame
White laminated Black cable + structure painted grey frame
Black laminated Black cable + structure painted black frame
Walnut veneer Black cable + structure painted grey frame

Product details

Material Form pressed birch slats, painted steel frame
Dimensions Height 68.9–72.8 in, adjustable
Shade Ø 11.8 in
Base Ø 13.4 in
Weight 14.8 lb
Package 17.7 × 15.4 × 42.1 in, 22.9 lb
Voltage 120V 60Hz
Light source E26 base, LED max 22 W. Bulbs are not included. The use of special bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is prohibited, due to overheating.  
Cable 7.5 ft, switch on the cable
Classification Ingress Protection IP20, IEC Protection Class II, ETL/CETL listed
Assembly Separate instructions on the website.
Maintenance Wipe dust regularly. To remove fresh stains wipe with a slightly moist cloth.

Assembly instructions

Step 1Insert the bottom end of the upper steel tube into the lower steel tube.
Step 2Pull down on the cord to tighten. Tighten the black screw on the tube to fasten the cord. 
Step 3First, open the top screw on the bulb holder, then remove the round plate at the top.
Step 4Place the shade on the frame so that the small hook on the upper tube goes into the small hole in the lower ring of the shade. Ensure that the fixed round disc on the top of the frame is tightly fitted into the hole in the middle of the top of the shade. Finally, screw the round plate back onto the top of the lamp.

Details

ColourThe colour of the frame depends on the colour of the shade. Black shades come with black frames. Shades in other colours come with gray frames.
Information The top screw holds the round plate on top of the lamp holder. When placing the shade to the frame thetop screw should be opened to release the round plate. The shade is placed on the frame so that the fixed round disc on top of the frame is tightly fitted into the hole on top of the shade. The round plate is then screwed back onto the top of the lamp.

The small hook on the frame goes into the small hole in the lower ring of the shade.

Light distribution

Light distribution curve of Secto 4210. Since the luminaire is symmetric the light distribution curve is similar at every C-planes.

Download LDT

Secto 4210 floor lamp ›

Loading form